Johnny Joint Heavy Duty Adjustable Trac Bar For TJ/XJ/LJ/MJ JeepSpeed Applications W/1/2 Inch Housing Bolt Currie Enterprises

The all new and improved Johnny Joint trac bar for the TJ/XJ/LJ/MJ features an offset Johnny Joint rod end that puts the bar further forward providing more clearance between the diff and the trac bar. Other features include 1 1/4 inch x .250 inch wall 4130 chrome moly construction, a Welded in gusset from the bar to the Johnny Joint, heavy duty adjustor end with urethane bushing and steel insert sleeve, and semi-gloss black Powdercoat finish. Some drilling is required for installation. The sUpplied frame bolt is a 5/8 inch, and the sUpplied housing bolt is 1/2 inch. Both of these holes must be drilled to size to accommodate the heavier duty hardware. A heavy duty nut plate kit is sUpplied for the housing end. Note: This trac bar is intended to be used with a minimum of 2 inchs of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9 inch or 60 frontend, you may run into a clearance issue. Always check fitment before drilling!
Fits:

• 1997-2006 Jeep Wrangler TJ
• 2004-2006 Jeep Wrangler LJ Unlimited
• 1984-2001 Jeep Cherokee XJ
• 1986-1992 Jeep Comanche MJ

Details:

• TJ/LJ/XJ/MJ Johnny Joint JeepSpeed Front Trac Bar
• Intended On Vehicles With Minimum 2 Inches Of Lift
• 1.250 Inch x .250 Inch Wall 4130 Chrome Moly Tubing
• Heavy Duty Adjuster End Has Urethane Bushing With Steel Insert Sleeve
• 2 Inch Johnny Joint Greasable Rod End Gusset On Frame End Of Bar
• Drilling Required For Larger Bolt Sizes To Fit Vehicle
• Gold Zink Plated Mounting Hardware
• Black Powdercoat Finish On Track Bar
• Sold As Each