DIY Toyota Transfer Case Crossmember Center Plate Low Range Off Road

We have requests for a way to bolt up your Toyota case when doing a not so common engine or transmission swap. This crossmember is made from 3/8 inch Thick material and bolts onto the back side of a RF1A Gear Driven Toyota Transfer Case. Sometimes these are called Horse Collar cross-members because they bolt onto the outside edges of the t-case.

Does not come with bushings, or a way to mount to your frame- but that is what many want. One way of mounting it is by using tubing, and cutting a 3/8 inch notch in the tubing. Then you can slide the tubing in the end of the cross member on each side. You can use our Sleeved bushing kits, or use the bushings of your choice to mount to your frame. This makes it easy when doing ringr on Suzuki's or V8/V6 Swaps in Toyota's. Rather than mock one up yourself, these are priced low so it makes it cost affordable.
Includes:

• 3/8 Inch Thick Laser Cut Cross-member center plate
• Longer Hardware for bolting to the back of any gear driven RF1A Toyota Gear Driven Transfer Case found in 4Cyl 1979-1995 Toyota pickups and 4Runners